November 24, 2017, 04:08:01 pm

Author Topic: Offering Tech Service  (Read 868 times)

Offline Nekogami

  • Sr. Member
  • ****
  • Posts: 450
  • Intermediate Airsmith
Offering Tech Service
« on: May 19, 2014, 05:39:03 pm »
Want to build a nice performing gun but can't pay for tech shop's price and can't seem to open a gearbox up without it exploding? I'm here to help.

Summer has ended but I'm still looking to put my airsoft building to work to kill some of my free time.
I don't claim to be the best tech around but I can provide decent, affordable and fast service, I can also offer general teching advice and help you build part list.

Here are my price list, very transparent and I believe bs free:

Gear replacement+shimming:$20 This is the most expensive piece of service I offer because it's very essential and takes a good amount of time to get right.
Barrel treating: $5 only available for non-coated steel/brass barrel.
This is a method developed by HS5 and smooths out the bore of barrels.
Sorbo installation+aoe adjustment: $5 (price subject to adjustment depending whether sorbo pads are needed.)
Fixing compression: $5 and you are to acquired specific parts.
Aoe adjustment: bundled with sorbo or with the traditional washer way $3.
Mosfet installation: $5
Flathopping :$5
Rhopping with either purchased rhop patch or my personal silicone patches: $10
Barrel stabilization:$1
Wiring aeg to deans: $1
Wire battery to deans:$1

For general repair please pm me.

Cleaning and re-greasing are all included for free in standard gearbox service, you must provide parts specific to a service or extra $$ will be needed for me to fill it in.
If you have a some what extreme build in mind and will provide the parts, I may be interested in doing it for free.

Promise of completion within a week if there are no other airsoftguns being worked on during that time, photo/video will be provided in the working process.
And promise of service: if it doesn't work better than before its free.

And if you are interested in DIY I can point you in the right direction.
PM for more detail.
« Last Edit: October 15, 2014, 09:32:28 pm by Nekogami »

Offline lucky_13

  • Hero Member
  • *****
  • Posts: 801
  • Why buy when you can build?
Re: Offering tech service for the next 3 months
« Reply #1 on: May 19, 2014, 06:48:48 pm »
Where are you located?
I ran off and joined the Marine Corps.
2/1 Camp Pendleton, 2171.


Offline Nekogami

  • Sr. Member
  • ****
  • Posts: 450
  • Intermediate Airsmith
Re: Offering tech service for the next 3 months
« Reply #2 on: May 19, 2014, 06:57:05 pm »
Champaign, 61801
« Last Edit: October 15, 2014, 09:32:46 pm by Nekogami »

Offline Nekogami

  • Sr. Member
  • ****
  • Posts: 450
  • Intermediate Airsmith
Re: Offering tech service for the next 3 months
« Reply #3 on: June 01, 2014, 01:36:55 am »
Updating, migrating this to a facebook page... (yeah, that means it's serious business.)
Here's the link: https://www.facebook.com/nekogamiairsoft
« Last Edit: June 01, 2014, 02:02:43 am by Nekogami »

Offline Trippster

  • Hero Member
  • *****
  • Posts: 980
  • Ministry of Un-Gentlemanly Warfare
Re: Offering tech service for the next 3 months
« Reply #4 on: October 02, 2014, 02:24:40 pm »
I know this is a necro but...
Neko does good work, just got my gearbox back and it works like a charm.  :D
redtail [09|Nov 01:22 AM]:   TRIPPS I ALREADY TOLD YOU THEY ARE INDEPENDENT FILMS
redtail [09|Nov 01:23 AM]:   The moaning and bodily fluids are symbolic of the director's struggle with heroin addiction.

Offline Nekogami

  • Sr. Member
  • ****
  • Posts: 450
  • Intermediate Airsmith
Re: Offering tech service for the next 3 months
« Reply #5 on: October 15, 2014, 09:30:15 pm »
Thanks :) the pleasure is mine.

On another note, still open to build offers.