October 16, 2018, 09:38:44 pm

Author Topic: JG bar-10 plans/i would like opinions and help.  (Read 800 times)

Offline S1

  • Newbie
  • *
  • Posts: 7
JG bar-10 plans/i would like opinions and help.
« on: March 31, 2015, 01:18:44 am »
hello everyone i was looking for confirmation on a bar-10 build i am planing.

PDI Precision cylinder Compo set VC

PDI 380% spring (not sure the fps or if build can handle it so i am also getting 300% just in case)

PDI BEDDING PILLAR

PDI Hop-up chamber ver. 2 (have heard mixed things)

PDI 8.55 inner barrel spacers x4

PDI W HOLD CHAMBER PACKING / TM AEG BARREL

PDI silencer adapter

PDI v-trigger 2

ORGA Magnus 6.23mm Wide Bore Inner Barrel 500mm

Angel Custom Bio-Hazard 320mm CNC Aluminum 14mm Airsoft Mock Silencer - Silent Warrior (can be used as 160mm)

and the gun is the jg bar-10
« Last Edit: April 01, 2015, 10:48:20 am by S1 »

Offline Trippster

  • Hero Member
  • *****
  • Posts: 980
  • Ministry of Un-Gentlemanly Warfare
Re: JG bar-10 plans/i would like opinions and help.
« Reply #1 on: March 31, 2015, 01:41:30 am »
You might want to look into Rhop, its a fantastic hopup mod for long range. Someone once told me about http://www.airsoftsniperforum.com/ as a repository of BASR knowledge, its worth taking a peak if you haven't already. Also its worth joining http://forums.airsoftmechanics.com/index.php if you haven't already, its a great source of information.
redtail [09|Nov 01:22 AM]:   TRIPPS I ALREADY TOLD YOU THEY ARE INDEPENDENT FILMS
redtail [09|Nov 01:23 AM]:   The moaning and bodily fluids are symbolic of the director's struggle with heroin addiction.

Offline S1

  • Newbie
  • *
  • Posts: 7
Re: JG bar-10 plans/i would like opinions and help.
« Reply #2 on: March 31, 2015, 11:51:36 am »
thank you for the advice but an r-hop does not sound as good to me as to most people mainly because after its set you have to use the same bbs and i don't want to really cut the nub at all. but thank you for posting